Harvest Star HS-1690
Gantry · Guangdong Harvest Star Technology Co., Ltd.
| X / Y / Z travel | 1600 / 900 / 800 mm |
|---|---|
| Spindle nose to table | 180–980 mm |
| Between columns | 960 mm |
| Table size | 1800 × 900 mm |
| T slots number / width / spacing | 7 / 18 / 125 mm |
| Table load | 2000 kg |
Whole original HS-1690 image, exact model marking visible. Ordered accessories and control may differ.
Harvest Star HS-1690 is the door-type vertical machining reference for larger mould or part setups. Its model table lists X/Y/Z travel 1600/900/800 mm, an 1800 × 900 mm table and 2000 kg rated load. Specify the blank, support, fixture and load distribution; table dimensions and travel do not establish that any nominally matching workpiece can be loaded and machined.
The reference distance between columns is 960 mm and spindle nose to table 180–980 mm. Check the complete fixture and clamp envelope through the columns, with tool projection, lifting route, overhang and the full program path. The 900 mm Y travel, 900 mm table width and 960 mm column passage describe separate constraints. Stack the Z requirement and verify local cutter access and tool-change clearance.
The spindle reference is 6000 rpm with power 15/18.5 kW and torque 143/236 N·m under the original continuous/25% labels. Request the delivered curve and permitted intermittent cycle conditions for the proposed roughing speed; maximum torque, power and speed should not be combined as one operating point. Cutting feed is 1–6000 mm/min, while rapid X/Y/Z is 15/15/12 m/min.
The table lists a 24-position disc magazine and the description an arm-type changer; the stated T–T change time is not a complete part cycle. Confirm the installed interface, control, holder sizes and occupied adjacent positions. Use a representative loaded mould/part trial including roughing, finishing, chips, warm-up and released geometry. Machine-axis accuracy figures do not guarantee the part. Plan the 16000 kg mass and 5100 × 3960 × 3440 mm outer dimensions with actual foundation and service-clearance drawings.
| Same listing |
|---|
| HS-1066h |