Huadian HD-50
4-axis machining · Xingtai Huadian CNC Equipment Manufacturing Co., Ltd.
| Table / maximum load | 500 × 500 mm / 500 kg |
|---|---|
| Maximum workpiece swing | Ø750 mm; usable height and offset limits to confirm |
| X / Y / Z travel | 500 / 550 / 700 mm |
| Centreline-to-table / nose-to-table-centre | 120–670 / 140–840 mm |
| Table division / maximum speed | 1° × 360 / 12 rpm; continuous cutting not established |
| Spindle maximum speed | 3000 rpm; 8000 rpm optional |
The manufacturer’s HD-50 column describes a 500 × 500 mm single table with 500 kg maximum load and a Ø750 mm maximum workpiece swing. X/Y/Z travels are 500/550/700 mm. Include the tombstone or fixture, clamps and blank in the load and swept-envelope review; a circular swing limit does not establish workpiece height, eccentric-load allowance or access for every holder.
The table separately gives 120–670 mm from spindle centreline to table surface and 140–840 mm from spindle nose to table centre. These references answer different reach questions. Use the actual fixture centre height and longest tool to check entry, the deepest feature, withdrawal and the next indexed face. Neither dimension is a substitute for a complete clamped-part clearance drawing.
The published table division is 1° × 360 and the maximum table speed is 12 rpm. This establishes neither continuous four-axis cutting nor cutting torque at that speed. Ask for the delivered indexing/control mode, brake and clamping arrangement, permissible inertia and moment, and the coordinated functions included in the quotation.
For HD-50 the table lists 3000 rpm with 8000 rpm optional, a No.40 7:24 taper, 11/15 kW without duty labels and a 140 N·m maximum motor-torque entry. Keep the optional spindle separate and request the actual torque-speed/duty curve. The magazine has 24 tools, 8 kg maximum tool mass and a normal diameter/length entry of Ø78 × 300 mm; a separate Ø120 mm diameter applies with neighbouring stations empty. Confirm the supplied holders and which adjacent positions are unavailable.
This page’s horizontal-centre title and HD parameter table are used for the model reference. An introductory paragraph on that same manufacturer page describes vertical turn-mill equipment; that paragraph is not used to claim turning capability for HD-50. Obtain a model-specific build drawing and statement of the machine type rather than combining those descriptions.
The catalog body is 4500 × 2800 × 2800 mm with a 7500 kg machine mass. Confirm loading and service access, utilities and the installation plan. Trial the actual housing or valve fixture through the intended indexed faces, inspect released bore/face relationships and record tool changes, chip clearing and loading within the elapsed cycle. Catalog axis accuracy and table indexing are not guarantees of finished-part geometry.
| Same listing |
|---|
| HD-63 |
| HD-80 |