Skip to content

JFY BFC 3015

Laser · Jiangsu Jinfangyuan CNC Machine Tool Co., Ltd.

Catalog figures — see source review
Laser-power alternatives3 / 6 / 12 / 20 kW; choose one quoted build
X / Y machine travel3070 × 1545 mm; usable nest and loading clearance to confirm
Z-axis travel310 mm; not cutting-thickness capacity
Maximum X / Y speed140 m/min; axis-motion reference, not cutting feed
Maximum X / Y acceleration1.7 g; not complete nest throughput
Source-described optical packageJFY-customised fibre laser and cutting head; exact supplied models to agree

BFC 3015 should be quoted around the material and thickness mix that will actually be cut. Its exact column offers 3, 6, 12 or 20 kW laser configurations; these are alternatives, not one machine delivering every configuration. Send the material grades, thicknesses, sheet condition, quantities and required edge quality through the RFQ. The reviewed table does not establish thickness capacity or cutting speed for those combinations, so request a process recommendation for the selected laser and cutting-head build.

The BFC 3015 column lists 3070 × 1545 mm machine travel and 310 mm Z travel. Check the intended stock sheet and complete nest with edge margins, clamps, lead-ins and loading access before treating the travel figures as usable cutting area. Z movement is a head-positioning reference, not a 310 mm material-thickness rating. The same table includes larger BFC 4020 and 6025 columns; their dimensions and available power lists must stay separate from this quotation.

The published maximum X/Y speed is 140 m/min and maximum X/Y acceleration is 1.7 g. Neither figure predicts the cutting feed or output of a tightly nested sheet with many pierces and small contours. Request a sample nest in the actual grade and thickness, then assess contour dimensions, kerf, burr or dross, edge condition and small-hole results against agreed criteria. Time piercing, cutting, repositioning and sheet handling separately, and retain the gas and process settings with the trial result.

JFY describes a customised fibre laser, cutting head, large-screen operation, online programming and rapid nesting. Confirm the exact laser, head and control package in the delivery specification rather than carrying forward an unverified controller brand. Agree the included nesting-software licence, assist-gas requirements, extraction, cooling, electrical supply and safety provisions for the installation. Put consumables, training and destination service responsibilities in the same offer; the product table does not define those delivery obligations.

Same listing
MT+ 300E-2512
MT+ 300E-2515
MT+ 300E-2520