Skip to content

Lilian · 3-axis machining

Lilian VMC850B

VMC850B is the exact column in the manufacturer's hard-guideway series, which describes plastic-lined rectangular sliding ways on X/Y/Z, hardened and scraped, and a herringbone column. The 16 January 2019 company article uses Like (力科) and Lilian (利联) together; identify the current legal seller and builder in the quotation rather than treating a historical parenthetical name as a register extract.

The table is 1050 × 500 mm with 600 kg maximum listed load; travels are 800/500/500 mm and spindle-face-to-table distance 110–610 mm. Include fixture and blank mass, clamps, longest tool and holder projections. Table area, travel and spindle height are independent checks; confirm the complete tool path to the deep bore or farthest datum.

The original merged cells give VMC850B BT40 with Ø120 mounting entry, 8000 rpm, 24-position disc magazine and listed tool Ø80 × 120 mm/8 kg. The 5.5/7.5 kW main-motor entry needs its duty mapping. Ask whether the short tool-length reference includes the holder, and verify adjacent pockets occupied. Do not borrow the 1060B tool or motor figures. The 1.8 s tool-to-tool entry and 18/18/15 m/min rapids are not accepted-part cycle time.

Catalog specifications

Original table column
VMC850B hard-guideway series
Table / maximum load
1050 × 500 mm / 600 kg
X / Y / Z travel
800 / 500 / 500 mm
Spindle-face-to-table distance
110–610 mm
Spindle reference
BT40 / Ø120 mounting entry; 8000 rpm
X / Y / Z rapid
18 / 18 / 15 m/min

The source lists positioning/repeat positioning 0.012/0.006 mm, control alternatives and 20 kVA electrical capacity; its component list excludes some pumps, tank and air equipment. Agree a coherent current control/auxiliary package and acceptance standard. Trial the actual fixture/material, inspect after release and include chip clearing, setting and inspection in output. Obtain the delivered-build foundation/lifting/air/service drawing; approximate 5000 kg mass is a catalogue reference. The shared image is visibly VMC1580 and is not approved as an exact VMC850B photograph.

Other Lilian rows

Additional specifications

Disc magazine
24 positions
Listed maximum tool
Ø80 × 120 mm; 8 kg
Tool-to-tool change reference
1.8 s
Main motor entry
5.5 / 7.5 kW; duty mapping required
Positioning / repeat positioning references
0.012 / 0.006 mm; test conditions required
Approximate mass / electrical capacity
5000 kg / 20 kVA

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.