Skip to content

Renau · 3-axis machining

Renau SV-855H

Renau SV-855H manufacturer image
Whole original photograph visibly marked SV-855H. Control, spindle and auxiliaries depend on the ordered build.

RENAU SV-855H is the SV855H column in the dedicated SV-H image table, distinct from SV850H and the generic SV-L description on another page. It lists 820 / 550 / 550 mm X/Y/Z travel, a 1000 × 550 mm table and 500 kg table-load reference. Include the fixture, blank, clamps and any rotary attachment, then confirm access to the critical feature; neither the 855 designation nor table area establishes more cutting travel.

The spindle-nose-to-table window is 120–670 mm and the spindle-centre-to-column reference is 590 mm. Coordinate fixture height, workpiece height and cutter/holder projection with the full approach, retract and tool-change path. The table's BT40/Ø150 spindle installation entry is not evidence of a 150 mm through-spindle bore. Check the actual guards, clamp map and deep feature on a supplied build drawing.

The SV855H column lists 10,000 / 12,000 rpm alternatives and a main-motor selection reference of at least 7.5 kW; these are not one installed spindle duty curve. It gives 48 / 48 / 48 m/min rapid movement and 5300 kg net mass. The series standard/configuration lists and generic machining-centre page contain other spindle and mass references, so they are not combined here. Specify the installed control, enabled functions, spindle duty, magazine and complete occupied tool schedule in one offer.

Demonstrate the loaded fixture and longest tool in production material, including roughing, finishing, hole work, every tool change, chip handling and inspection. Measure drawing dimensions and surface after unclamping, repeat under agreed thermal/measurement conditions and record accepted output over the full loading-to-inspection cycle. The whole original photograph is visibly marked SV-855H; its enclosure/control appearance does not prove every ordered option. Confirm the current build revision and destination installation, training and service scope through CNCVerified.