Shinri · 3-axis machining
Shinri V70
V70 is SHINRI’s larger linear-guideway vertical-centre reference with 1300 × 700 × 750 mm X/Y/Z travel, a 1500 × 700 mm table and 1000 kg maximum-load reference. The June 2020 sample gives a 170–920 mm spindle-nose window. Use the longest housing or distant datum relationship to test the loaded fixture and tool reach. Include clamps, total mass/offset and the tallest section; travel, load and spindle clearance are separate constraints.
The web table gives 7000 rpm while the June 2020 sample gives an 8000 rpm MAS BT50 spindle. The sample separates 95 Nm continuous torque from 115 Nm for 15 minutes. It writes motor power as 15/18.5 kW without separately defining duty; those power entries are not automatically labelled continuous and peak. Agree one selected revision and obtain its speed/torque curve for the intended cutter and engagement. Listed X/Y/Z rapids are 24/24/18 m/min and maximum feed is 10 m/min, neither of which establishes a finished-part cycle.
The sample’s 24-position cam magazine uses MAS BT50/P50T-1 hardware. It permits Ø100 mm occupied assemblies or Ø200 mm with adjacent positions empty, and 350 mm length/15 kg mass. Plan large face mills, boring assemblies, sister tools and inspection tools after consuming the empty neighbours. The 2.5 s figure is tool-to-tool, unlike the V45 reference’s 1.8 s; include clearance moves, approach and spindle settling. FANUC 0i-MF is the sample control; confirm the current quoted control, coolant/chip equipment and postprocessor before assuming a complete package.
Catalog specifications
- X / Y / Z travel
- 1300 / 700 / 750 mm
- Table size / load reference
- 1500 × 700 mm / 1000 kg
- June 2020 sample nose window
- 170–920 mm
- June 2020 sample taper / pull stud
- MAS BT50 / P50T-1
- Spindle speed by reference
- Web 7000 rpm; June 2020 sample 8000 rpm
- Sample spindle torque continuous / 15-minute
- 95 / 115 Nm; not a full speed/torque curve
Acceptance should include the long-projection shoulder, deep pocket or bore that challenges fixture rigidity and the farthest important datum. Record sustained cutting, wear, warm-up and full elapsed time; inspect released geometry when clamping affects form. Machine inspection figures are separate from finished-part guarantees. The web body is 3800 × 3100 × 3000 mm; the sample including conveyor is 5040 × 3000 × 3150 mm at 10 t. Agree the actual foundation, lifting and maintenance layout. The original V55 family illustration does not show an exact V70 machine.