SW BA W06-11
4-axis machining · SW Machine Tools (Suzhou) Co., Ltd.
| Machining spindles | 1 |
|---|---|
| Workspace per spindle X / Y / Z | 1150 / 630 / 510 mm |
| Clamping bridge reference | Up to 1000 mm diameter × 1505 mm |
| Carrier transport-load reference | 1000 kg; includes fixture/load, confirm project |
| Baseline spindle | HSK-A63, 1–17500 rpm |
| Baseline power / torque | 35 kW / 80 Nm at 40% duty |
Original image embedded on the BA W06-11 technical-sheet page; confirm delivered options.
BA W06-11 is the single-spindle reference in SW’s BA W06 family. Its linked data sheet lists 1150/630/510 mm workspace per spindle and a clamping-bridge reference up to 1000 mm diameter × 1505 mm. The 1000 kg transport-load entry applies to the carrier arrangement, not an unrestricted 1000 kg blank; prove the proposed fixture, swept geometry and loading condition.
The baseline HSK-A63 column gives up to 17500 rpm, 35 kW and 80 Nm at 40% duty, an 84-position pick-up magazine and 450 mm maximum tool length. Alternative HSK-A80/A100 configurations have their own speed, duty, mass and magazine entries. Do not combine the highest figures across columns. The additional Y tool-change position is not additional machining workspace.
For a wider housing or mixed operation sequence, send the part datums, fixture and rotated tool-clearance drawing. Include real loading, clamping, tool-life/replacement, measurement and recovery steps in the trial. Judge accepted parts over the agreed interval, with machine inspection and drawing-specific part acceptance recorded separately.
| Same listing |
|---|
| BA W06-22 |
| BA W06-42 |