Taikan HT-V856S
3-axis machining · Guangdong Create Century Intelligent Equipment Group (Taikan / Janus)
| Reviewed model reference | English HT-V856S table; original image marked T-V856S |
|---|---|
| X / Y / Z travel | 800 / 550 / 600 mm |
| Spindle-nose / table distance | 125–725 mm |
| Spindle-centre / column-guide distance | 590 mm |
| Table dimensions / evenly distributed load | 1000 × 500 mm / 500 kg |
| T-slots number / width / pitch | 5 / 18 / 100 mm |
Whole original model-page image; machine marked T-V856S. Appearance and revision are catalogue references.
HT-V856S is described on the English S-series page as a fixed-column, cross-table vertical machining centre with three linear guide axes. Travel is 800/550/600 mm and table 1000 × 500 mm, rated 500 kg with evenly distributed loading. The 125–725 mm nose-to-table window needs checking with the real clamps, raised fixture and longest holder. Table area and travel do not guarantee that every feature on a similarly sized part is reachable in one setup.
The reviewed directly coupled spindle is listed at 50–12000 rpm, with BBT40 interface and P40T-I (MAS403) retention-stud reference. Confirm holder/stud compatibility and the delivered spindle package; T-500B’s BT30 tools are not transferred to this build. Motor entries are 7.5/11 kW and 35.8/95.5 Nm rated/short-time. Ask for duty duration and the speed-dependent curve for the intended roughing load, rather than combining the maximum values into an unsupported cutting promise.
The 24-tool magazine lists 7 kg mass, 250 mm length and 75/150 mm tool diameter with neighbours present/empty. A large face mill or long boring holder may consume adjacent pockets; reserve space for sister tools and probes in the actual sequence. Mitsubishi M80VB is the controller named in this model table, with 1–10000 mm/min cutting feed and 48 m/min rapid motion per linear axis. A separate gallery of controller brands does not establish the quoted control configuration.
Trial the difficult bore, longest holder and datum relationship through roughing, finishing, release and re-clamping using the offered machine/fixture/programme. Include chip removal, coolant, loading access and controlled restart, then inspect the accepted part. Utility references are at least 280 L/min ANR air at 0.6–0.8 MPa, 25 kVA capacity and a 300 L coolant tank. Published body dimensions are 2240 × 3121 × 3026 mm and approximate mass 4600 kg; obtain full service/conveyor clearances and destination commissioning support. The original page image marked T-V856S is retained whole as a catalogue appearance reference.
| Same listing |
|---|
| T-500B |