Yawei · Punch
Yawei HPM-3048
HPM-3048 is Yawei’s servo-controlled CNC turret-punch reference, with 294 kN nominal force and 56 standard die positions in the active English model table. It lists 6.35 mm maximum carbon-steel sheet, 4 mm stainless sheet and 88.9 mm maximum single-punch diameter separately. Those maxima do not establish punching the largest perimeter through the strongest, thickest sheet. Submit material strength, feature perimeter, tool/die clearance and a tool-specific force calculation.
The published 1250 × 5000 mm maximum processing sheet size explicitly includes one repositioning. It is not an uninterrupted-axis envelope. Request clamp and no-punch-zone drawings, the two-stage programme, datum retention and a sample with features across the reposition boundary. The ±0.1 mm punching entry needs agreed material, tooling and measurement conditions; it does not by itself guarantee hole position, form height or finished-part flatness.
The frequency table gives 2500 cycles/min in a general row, 900 cycles/min maximum at 1 mm step/6 mm stroke, and 450 cycles/min maximum at 25.4 mm step/6 mm stroke. Keep those conditions separate. Time the complete nest with indexing, clamp avoidance, repositioning, forms, scrap and unloading. Sheet travel of 102 m/min and turret rotation of 30 rpm are distinct motions, not a cutting spindle or usable-part output.
Catalog specifications
- Reviewed reference
- English HPM page, active HPM-3048 table
- Nominal punching force
- 294 kN
- Maximum sheet size
- 1250 × 5000 mm, including one repositioning
- Maximum carbon-steel sheet thickness
- 6.35 mm; force/tool/material conditions to agree
- Maximum stainless-steel sheet thickness
- 4 mm; force/tool/material conditions to agree
- Maximum single-punch diameter
- 88.9 mm; not simultaneous maximum-thickness capability
Yawei describes rolling-forming capability; quote the required form tools, orientation, height and support/clearance rather than assuming an equipped die set. Seven listed axes—X, Y1, Y2, T1, T2, C and Z—belong to punch control, not seven-axis milling. The table lists 0.6 MPa air, 5610 × 5000 × 2300 mm outside dimensions and 17500 kg mass. Confirm utilities, floor/loading and full service clearances, then trial the form and repositioning sequence with restart recovery. The retained original image visibly bears HPM-3048.