Amada · Punch
Amada AE-2510NT
AE-2510NT is the AC servo turret-punch reference on AMADA’s China site. The page lists 200 kN punching force and a 2500 × 1270 mm maximum processing range. Its pictured MP2512L loading/unloading combination is a complete system example; specify whether that automation, pallets and safeguards are included in the proposed order.
The turret choices are 58 stations with two auto-index positions or 45 stations with four auto-index positions. They are alternatives, not a combined tool capacity. Map hole shapes and formed features to the actual punch/die set, station size and index requirements. Calculate punching load and die clearance for the grade/thickness; force alone is not a universal plate-thickness limit.
At 25.4 mm pitch and 5 mm stroke, the catalogue hit rates are X 350 and Y 280 per minute. The page’s ±0.1 mm accuracy, or ±0.07 mm FA-mode entry, follows the manufacturer’s own standard. Neither establishes the full finished-sheet cycle or drawing-specific feature quality. Trial the intended nest, tooling, clamp/support sequence, single-sheet separation, stacking and recovery, then inspect released sheets against the agreed datums.
Catalog specifications
- Punching force
- 200 kN
- Maximum processing range
- 2500 × 1270 mm
- Catalogue punch rate at 25.4 mm pitch / 5 mm stroke
- X 350 / Y 280 per minute
- Turret alternatives
- 58 stations / 2 auto-index, or 45 stations / 4 auto-index
- Processing accuracy under manufacturer standard
- ±0.1 mm; ±0.07 mm in FA mode
- Shown automation
- MP2512L loading/unloading system; confirm order scope