Skip to content

Gold VMC1160

3-axis machining · Shandong Gold CNC Machine Tool Co., Ltd.

Catalog figures — see source review
X / Y / Z travel1100 / 600 / 600 mm
Table dimensions / load1200 × 600 mm / 800 kg
Spindle nose to table120–720 mm
Spindle centre to column guide673 mm
T-slot layout5 × 18 mm wide, 100 mm spacing
Spindle motor11 kW; duty unspecified
Gold VMC1160 manufacturer image

Whole original VMC1160 photograph with the matching model marking; options subject to delivered configuration.

GOLD CNC lists VMC1160 with 1100 × 600 × 600 mm axis travel, a 1200 × 600 mm table and an 800 kg loading reference. Compared with its VMC855, it provides additional X stroke and loading capacity for larger fixtures or multiple parts. Check the loaded centre of gravity, clamp layout and every cutting feature; the wider setup still has to clear the spindle, holder and enclosure.

The published nose-to-table range is 120–720 mm, with 673 mm from spindle centre to the column guide. The original slot notation corresponds to five 18 mm slots on 100 mm spacing. A long holder or deep pocket needs a collision and retract check within this stack, not simply a comparison of blank height with 600 mm Z travel. Include both loaded and tool-change positions in the supplier drawing.

The original technical table lists 8000 rpm, belt drive and an 11 kW spindle motor, with direct drive and 10000, 12000 or 15000 rpm configurations optional. This table describes spindle oil cooling; confirm it in the delivered package and obtain motor duty and torque curves for the selected speed. The 24-position disc magazine limits adjacent occupied tools to 78 mm diameter, or 120 mm with surrounding positions cleared; tool length and mass are 300 mm and 8 kg.

The table describes three linear-guide axes but a separate brochure heading uses hardened-guide wording, so the accepted build must resolve the guide configuration. Specify control, coolant, chip removal and inspection requirements. The source gives 3050 × 2300 × 2500 mm outer dimensions but no machine mass; obtain foundation, lifting and transport drawings without borrowing VMC855 weight. Use the offered customer-material trial to compare a released workpiece, complete cycle and chip handling under the proposed configuration.

Same listing
VMC855

Additional specifications

Outer dimensions
3050 × 2300 × 2500 mm
Spindle cooling
Oil cooling in the published package; confirm delivered scope
Standard spindle
8000 rpm; higher-speed versions require a separate quotation
Spindle taper
BT40; published 150 mm suffix requires a spindle drawing
Spindle drive
Belt; direct drive optional
Rapid traverse X / Y / Z
24 / 24 / 24 m/min
Cutting feed
1–10 m/min
Tool magazine
24-position disc
Tool diameter
78 mm with adjacent positions occupied / 120 mm with adjacent positions clear
Maximum tool length / mass
300 mm / 8 kg

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.