Skip to content

Hongxin · Grinding

Hongxin MK73125

Original MK73125 rotary-table grinder manufacturer photograph
Whole original photograph from the exact manufacturer model page. Confirm delivered fixtures, wheel and options.

MK73125 is Xinghe Hongxin’s crossbeam horizontal-spindle rotary-table surface grinder. The individual entry lists a 1250 mm worktable, while the introduction describes a larger 1250–3500 mm family. Use 1250 mm as this model’s catalogue table reference and separately establish the fixture sweep, part height/load and wheel reach.

The MK description specifies programmed vertical and transverse feeds with two-axis linkage and compensation. M73125P is a separately named touchscreen/servo-feed route; it is not an interchangeable control specification. A customized horizontal/vertical twin-head arrangement and up-to-45° vertical-head tilt are described as options, not standard equipment on every MK73125.

For two-face plates or rings, trial the actual chuck/supports, cleaning, turnover and second-face locating. Measure released flatness, parallelism, thickness distribution and finish after agreed temperature stabilization. Confirm the wheel/dressing interval, coolant and technical-agreement test conditions rather than converting the source’s machine/trial-piece figures into a general part-accuracy warranty.

Catalog specifications

Individual model worktable
1250 mm; series extends to other sizes
Spindle / grinding contact
Horizontal spindle / wheel periphery
Machine arrangement
Rotary bed table, twin-column crossbeam, traversing carriage and vertical head feed
MK control description
Programmed vertical/transverse feed with two-axis linkage and compensation
Customized head option
Horizontal/vertical twin heads; described vertical-head tilt up to 45°, separately agreed

Other Hongxin rows