Huadong VMC1370
3-axis machining · Weihai Huadong CNC Co., Ltd.
| X / Y / Z travel | 1300 / 700 / 700 mm |
|---|---|
| Table size / load reference | 1400 × 700 mm / 1200 kg |
| English BT40 spindle / nose window | 8000 rpm / 120–820 mm |
| English BT40 motor-power entry | 11/15 kW; duty not defined |
| Chinese BT50 build reference | 8000 rpm / 15/18.5 kW (duty rating not stated in the catalogue); nose 70–770 mm |
| Rapid X / Y / Z | 24 / 24 / 24 m/min |
Whole original VMC-family illustration visibly VMC1060; not an exact VMC1370 photograph.
VMC1370 is Huadong’s larger vertical-centre reference with 1300 × 700 × 700 mm X/Y/Z travel, a 1400 × 700 mm table and a 1200 kg load reference. Start with the loaded housing and fixture, not just the raw-part outline. Check the farthest datum relationship, deepest pocket and tallest section with the intended cutter projection. Include fixture mass/offset and ask for permitted load distribution and the full tool/workholding clearance drawing.
The English table describes 8000 rpm BT40, 11/15 kW without defined duty, and a 120–820 mm nose window. The Chinese technical image separately lists BT40 and BT50 VMC1370 builds. Its BT50 column gives 8000 rpm, 15/18.5 kW with no duty rating stated and a different 70–770 mm nose window. Keep those columns coherent. A larger taper does not automatically mean more useful torque at cutting speed; obtain the selected spindle/motor curve. The listed X/Y/Z rapids are 24/24/24 m/min, separate from achieved cutting feed or full-cycle time.
The English BT40 reference has a 24-tool arm magazine, MAS403 BT40-45 retention and an 85/350 mm tool diameter/length entry. The Chinese image gives BT40 Ø78 occupied/Ø120 empty-neighbour diameter, 300 mm/8 kg, versus BT50 Ø110/200 mm and 300 mm/15 kg. Tool-to-tool references are 2 s and 2.91 s respectively. Plan the largest complete boring/face-milling assemblies and sister tools after reserving neighbours. Specify current control, included magazine, chip conveyor, through-spindle coolant, scales and probing; generic accessory lists are not the contracted package.
Trial the feature requiring the longest projection and the distant datum with the actual material, fixture and thermal conditions. Record tool wear and the complete sequence, then inspect released size/form/relationships where clamping distortion matters. If grinding is a later stage, define stock allowance and datum handover separately. The listed body is 3580 × 2800 × 2850 mm at 9800 kg; obtain delivered foundation, lifting and service clearances. The original family picture is visibly VMC1060, so it does not prove an exact VMC1370 appearance or option fitment.
| Same listing |
|---|
| VMC850E |