JCSGY α-D14MiA
3-axis machining · Beijing Precision Machinery & Engineering Research Co., Ltd.
| Manufacturer as described | FANUC; Gongyan agency sales/service reference |
|---|---|
| X / Y / Z travel | 500 / 400 / 330 mm |
| Table dimensions | 650 × 400 mm |
| Uniformly distributed table load | 300 kg |
| Spindle-face-to-table distance | 150–480 mm without specified high-column option |
| Spindle speed | 100–10,000 rpm |
The α-D14MiA reference on Gongyan's site identifies the equipment as a FANUC product, with Gongyan providing agency sales and service. This is a catalogue statement rather than a current availability or agency certificate. Name the actual machine manufacturer, legal seller, build/serial revision and destination service provider; do not describe it as a Gongyan-built optical finishing machine.
The published travels are X/Y/Z 500/400/330 mm; table size is 650 × 400 mm with 300 kg uniformly distributed load. Spindle-face-to-table distance is 150–480 mm without a specified high-column option. Include fixture and blank mass, height, chuck/holder projections and longest tools in the clearance drawing. Travel, table size and uniform load are separate checks, not one guaranteed machining envelope.
The source describes a 14-position turret changer with BT30/P30T-1 interface. Its Ø80 mm maximum tool diameter and 250 mm tool-length entry have build qualifications. The page separately lists 2 kg/tool with 15 kg total, or 3 kg/tool with 22 kg total; confirm one coherent delivered package. Spindle speed 100–10,000 rpm, 48 m/min rapid feed and 1.4 s tool-to-tool change are machine references, not a complete cycle.
Trial the hardest hole, thread, bore and milled datum with the occupied tool map and real fixture. Include chip clearing, loading, tool changes and inspection, then measure released geometry under agreed thermal conditions. Ask for current model mapping, control/options, coolant, foundation/power, backups, training and actual FANUC/Gongyan service responsibility. The site's shared illustration has a D21MiA filename and is not approved as a D14MiA photograph; ISO/CE claims in old prose are not promoted as current model certificates.
| Same listing |
|---|
| SPHERE200 |
| SQUARE-200 |