Skip to content

Kaiyuan · Grinding

Kaiyuan M1050A

Kaiyuan M1050A manufacturer image
Whole original photograph linked by the K-YUAN catalogue to M1050A. Confirm the actual manufacturer and delivered configuration.

K-YUAN lists M1050A in its centreless grinder sales catalogue, linking the model name to this original technical page. It is a reference for cylindrical and ring-shaped through-feed grinding; the catalogue describes an added infeed mechanism for conical parts up to 1:20 taper. Confirm the actual manufacturer, new/refurbished status, feed attachment and build revision rather than treating the historic group name as proof of the delivered machine identity.

The table separates through-feed diameter Ø5–50 mm from infeed Ø7–50 mm and lists maximum grinding length 120 mm. Check blank steps, shoulders, support blade, guides and wheel approach for the whole part. Main regulating-wheel-stand feed is manual, while infeed uses a hydraulic slide swing. The grinding spindle is described with a five-pad hydrodynamic bearing and the regulating spindle with a sliding-bearing arrangement; these do not establish an unconditional part-accuracy guarantee.

The published wheel designations are P400 × 150 × 203 for grinding and PSA300 × 150 × 127 for regulating. Grinding speed is 1668 rpm with an 11 kW motor; regulating speed 20–200 rpm with 1.5 kW. Dressing feeds are manual and reciprocation hydraulic. Select abrasive, bond, form, blade geometry, coolant and dressing interval for the intended material, allowance and feed route.

Catalog specifications

Through-feed diameter
5–50 mm
Infeed diameter
7–50 mm; attachment/configuration to confirm
Maximum grinding length
120 mm
Grinding wheel designation
P400 × 150 × 203
Regulating wheel designation
PSA300 × 150 × 127
Grinding spindle speed
1668 rpm

Trial representative blanks with the agreed supports and complete feed/loading sequence, including dressing and warm-up. Inspect released roundness, size consistency, finish and any datum relationship under agreed conditions; source working-accuracy figures omit full part/test conditions. Reference total motor power is approximately 13.78 kW, external dimensions 1920 × 1681 × 1479 mm and machine mass 2800 kg. Obtain actual foundation, utilities, operator training and supplying/manufacturing documents.

Other Kaiyuan rows

Additional specifications

Regulating spindle speed
20–200 rpm
Wheel-centre line to support base
220 mm
Grinding spindle motor
11 kW
Regulating spindle motor
1.5 kW
Total motor power
approximately 13.78 kW
Outer dimensions
1920 × 1681 × 1479 mm
Machine mass
2800 kg
Main / infeed actuation
Manual regulating-stand feed / hydraulic slide swing

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.