Kaiyuan MK10100

K-YUAN lists MK10100 as a four-axis CNC centreless grinder in its grinding-sales catalogue. The technical page describes a single-sided moving regulating-wheel stand, double-V rolling-steel guides and servo feed, with dual-supported rolling bearings for the grinding and regulating spindles. The catalogue name and original photograph establish the published reference; confirm the actual manufacturer, controller, build and supply responsibilities in the quotation.

Through-feed diameter is Ø5–100 mm and grinding length 250 mm with the standard support. Infeed Ø5–100 mm and length 280 mm are explicitly special-order references, not automatic features of the standard through-feed package. Define shoulders, wheel form, stopped-part support, loading, guides and clearance before selecting infeed. The 200 mm wheel-centre-line-to-support-base dimension is not a universal blade or work-centre-height setting.

The source publishes grinding/regulating wheel designations 1~610 × 300 × 305 mm and 1~320 × 300 × 203 mm. Grinding spindle speed is 1380 rpm with a 22 kW motor. Regulating working speed is 10–200 rpm, with 300 rpm listed separately for dressing and a 3 kW motor. Dresser feed is servo; reciprocation is a geared-motor or servo alternative, with compensation described for the dual-servo arrangement. Confirm that arrangement instead of assuming all variants are supplied.

Run representative material, allowance and support through a complete grinding trial with warm-up, dressing, loading and inspection. Agree released roundness, size, finish and drawing datum relationships using specified measurement positions and methods; catalogue working-accuracy values do not guarantee every setup. Total motor power is approximately 27 kW, reference dimensions 2420 × 1540 × 1700 mm and mass approximately 5900 kg. Define actual wheel/blade/dresser supply, utilities, training and the signed acceptance conditions.