Skip to content

Ligang turning

Ligang QT45LMS

Zhejiang Ligang Machine Tool Co., Ltd. · Taizhou

  1. Current table configurationQT45LMS500
  2. Maximum turning diameter / length (mm)250 / 365
  3. X / Z1 / Z2 travel (mm)145 / 430 / 350
  4. Main bore / bar capacity (mm)56 / 45
  5. Sub-spindle bore / bar capacity (mm)49 / 35

The current QT45LMS table identifies an LMS500 configuration with a live-tool turret, main spindle and sub-spindle, without a Y axis or tailstock. It lists maximum turning diameter/length of 250/365 mm, X/Z1 travel 145/430 mm and Z2 travel 350 mm. Those figures belong to the current table; the manufacturer's 2025 exhibition brochure has different Z2, mass and sub-spindle entries and is not silently merged with it.

The main-spindle row lists a 56 mm bore and 45 mm bar capacity at up to 4500 rpm; the sub-spindle row lists a 49 mm bore and 35 mm bar capacity at up to 5000 rpm. Both list A2-5 noses and 6-inch chucks. Through-bar capacity does not establish the permitted grip on a larger turned blank. Define the receiving surface, jaw engagement, axial stop, synchronisation, clamp verification and recovery after an interrupted transfer.

Main-spindle power is explicitly 7.5/11 kW for continuous/15-minute duty. The sub-spindle's 13.4/17 kW entry does not state the corresponding duty definitions on that page. Do not assume identical duty meaning. The current photo carries PT45L-500 and is withheld as an exact LMS image. Request an exact current build/photo and prove second-end access and released-part datum relationships through the representative complete cycle, including loading, transfer, unloading and normal intervention.

Additional specifications

Main / sub maximum speed (rpm)
4500 / 5000
Listed machine mass (kg)
3800
Dimensions (mm)
2475 × 1645 × 1720

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.