Skip to content

Ligang turning

Ligang QT45LMY

Zhejiang Ligang Machine Tool Co., Ltd. · Taizhou

  1. Current table configurationQT45LMY400
  2. Maximum turning diameter / length (mm)280 / 340
  3. X / Z1 travel (mm)175 / 410
  4. Y travel (mm)±40
  5. Servo tailstockMT4; 360 mm travel

QT45LMY's current official table describes an LMY400 configuration with a live-tool turret, servo MT4 tailstock and Y travel of ±40 mm. It does not list a sub-spindle. Maximum turning diameter/length is 280/340 mm, X/Z1 travel 175/410 mm, and tailstock travel 360 mm. The signed Y figure is not an 80 mm one-sided tool reach.

Choose Y motion from the off-centre holes, flats or slots on the actual drawing. Check the assembled holder, orientation, jaws, support and tool sweep together; a feature can fit nominal travel but remain inaccessible with the intended setup. Specify supplied driven-tool functions and controller/interpolation capability, then trial the difficult feature and inspect it after unclamping against the related part datums.

Its current main-spindle row lists A2-5, a 6-inch chuck, 56 mm bore, 45 mm bar capacity and 4500 rpm, with 7.5/11 kW for continuous/15-minute duty. Listed mass is 3900 kg and dimensions 2450 × 1800 × 2055 mm; the manufacturer's dated 2025 brochure gives a different mass. The current web photo is marked PT45L-500, so no false model-matched image is displayed. Require one dated build schedule and exact photograph, plus a released-part and complete-cycle acceptance record.

Additional specifications

Listed machine mass (kg)
3900
Dimensions (mm)
2450 × 1800 × 2055

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.