Waji turning
Waji CK5112F
Dalian Waji CNC Machine Tool Co., Ltd. · Dalian

- Specification scopeCK5112F×12/3 reference; not all F builds
- Maximum cutting diameterØ1250 mm
- Maximum workpiece height1250 mm
- Table diameterØ1000 mm
- Workpiece mass reference3200 kg; loaded fixture/offset assessment required
This CK5112F record uses Waji’s particular CK5112F×12/3 specification, rather than treating every F-suffix machine as the same build. The sheet lists Ø1250 mm maximum cutting diameter, 1250 mm maximum workpiece height, Ø1000 mm table and 3200 kg workpiece mass. Prepare the complete blank and clamping layout, including fixture mass, overhang and centre of gravity, then obtain the permitted loading and jaw/support arrangement. Cutting diameter is not supported table diameter.
The specified square ram has 850 mm horizontal and 850 mm vertical travel, 180 × 240 mm section and a 32 × 32 mm tool-shank reference. Crossrail movement is separately listed at 1000 mm and raising speed at 660 mm/min. Crossrail repositioning is not additional interpolated Z cutting travel. Map beam position, bore depth, shoulders, tool projection and withdrawal on the selected-machine section drawing before approving a tall or deep internal feature.
The ×12/3 sheet describes a two-range stepless table drive at 6.3–200 rpm, 37 kW main motor, Siemens 828D and two controlled/interpolated X/Z axes with semi-closed-loop control. The maximum torque reference is not a continuous curve at every speed. The family also offers other drives and tool carriers; do not add an electric turret or a different control to the square-ram reference without a dated selected-build offer. Confirm encoder functions for threads and constant-surface-speed work.
Trial the intended material, casting allowance, loaded fixture and least-stiff tool reach, then measure agreed bore/face relationships, roundness and finish after release. Machine geometry and catalogue testpiece finish are separate from acceptance of the buyer’s casting. Obtain the actual foundation, lifting, lubrication/electrical documents and destination service responsibilities. The original family photograph is visibly marked CK5112B, despite a D-series prose caption; it is a layout illustration, not a matched photograph of this F build.