Skip to content
Official MLTOR logo

MLTOR · 迈雷特
Zhongshan, Guangdong

MLTOR: choose the cutting route for your gear geometry

Internal cylindrical gears and spiral bevel gears need different tools, locating arrangements and inspection plans. Start with the tooth drawing before comparing these two machines.

Official company material and original model brochures reviewed 8 October 2026

Which tooth geometry are you making?

01 · Cylindrical internal gear

Straight or helical internal teeth

The YK8035 route is gear skiving. Check the internal tooth geometry, cutter entry and exit, adjacent shoulders and clamping clearance together. An accessible bore is essential information for a tooling proposal.

Review YK8035 tooling and envelope ↓
02 · Spiral bevel gear

Teeth on a conical gear blank

The YK2232 route is spiral bevel gear milling. Specify the bevel geometry, cutter system, locating surfaces and, where applicable, the mating gear and assembly requirements.

Review YK2232 cutting package ↓

350 mm and 320 mm describe different dimensions

YK8035 publishes a maximum machining inner diameter of 350 mm. YK2232 publishes a maximum pitch diameter of 320 mm. Neither number should be substituted for the other, or treated as a complete blank-and-fixture envelope. Send a dimensioned section through the gear and its locating surfaces.

YK8035: clear the cutter inside the gear

Official MLTOR YK8035 gear-skiving machine photograph
Original manufacturer image of YK8035. Tooling, fixture and automation scope must be identified in the quotation.

Internal skiving envelope

Maximum machining inner diameter / module
350 mm / 4
Maximum skiving length / minimum teeth
100 mm / 17
Tool spindle / worktable speed
1500 rpm / 1000 rpm
Worktable diameter
370 mm
Tool shift / tool-head swivel
±55 mm / ±30°
Z range / tool interface
75–355 mm / HSK100
Main motor / total power entry
27 kW / 55 kW
Machine dimensions / mass
4100 × 2800 × 2800 mm / 11000 kg
Open YK8035 model details ↗

Approve the cutter and fixture as a pair

Supply internal tooth count, module, helix information, tooth length and the blank's bore, shoulders and clamping section. Request a cutter proposal and an interference check covering approach, full tooth depth and withdrawal. The published ±30° head swivel is a machine setting range, not a stated maximum workpiece helix angle.

MLTOR describes six controlled axes, direct-drive B/C axes, rotary-encoder feedback, cooling and its iSmart-Ai800A control. Demonstrate the offered control version, gear program and any remote/MES interface using your own job. A named interface does not establish compatibility with your production system.

YK2232: specify the bevel cutter system

Original MLTOR YK2232 spiral bevel gear milling machine image
Official YK2232 image. The manufacturer's direct-drive graphic is a design description, not a third-party certification.
YK2232 original brochure entries, kept separate from YK8035.
Gear / cutting itemPublished valueProposal requirement
Pitch diameter / moduleUp to 320 mm / 6Complete blank, pitch geometry and tooth drawing
Whole tooth depth / face width14 / 40 mmActual tooth system and machined width
Teeth / root-cone angle5–150 / 0–90°Gear and mating-member geometry where relevant
Cutter-disc sizes3.5, 4, 6 and 7.5 inchesSelected cutter, blades, holder and supply scope
Tool spindle1000 rpm; HSK-100ATool assembly and cutting conditions
Work spindle300 rpm rated; 500 rpm maximumOperating duty for the proposed job
Axis arrangementSix controlled; five simultaneousProgram demonstration for the specified gear
Dimensions / mass3920 × 3201 × 3760 mm / 15200 kgInstalled layout, foundation and service clearances

Swipe the cutting-package table on a narrow phone.

Open YK2232 model details ↗

Agree the cutter system and the data needed to calculate settings before purchasing tooling. Include the locating bore, back face and any shaft/fixture projection in the clearance study. A supported cutter-disc diameter alone does not confirm every tooth system or blank can be processed.

MLTOR also describes loading, inspection, washing and storage modules. Order them as an explicit automation package with interfaces and acceptance criteria; they are not established as standard equipment on the pictured machine.

A gear drawing is more useful than a diameter-only inquiry

Tooth definition

Name cylindrical internal or spiral bevel geometry. Include tooth count, module convention, pressure angle, helix or cone information, face width, tooth depth and the drawing revision. Supply the tooth-system data requested by the proposed tooling process.

Blank and datum

Specify material, hardness/heat-treatment state, blank dimensions, locating faces, bore or shaft, clamping allowance and obstructions. Describe incoming variation and which features are already finished.

Production sequence

Show where gear cutting sits relative to heat treatment and later finishing. Give batch sizes, part mix, tool-life expectations, loading arrangements and inspection availability. Identify any manual operations within a requested cycle.

Agree how the finished gear will be accepted

The brochures contain manufacturer accuracy-grade claims. They are not CNCVerified test reports, and the inspection standard must match the gear form and drawing. Ask the supplier to identify the standard, revision, measured characteristics, measurement equipment and report for your trial part.

Internal-gear trial

Demonstrate the actual cutter/fixture setup, tooth entry and exit, completed tooth length and gear measurement against the drawing. Inspect the part after unclamping using the agreed datums. Record material state, tooling, cutting settings, inspection method and cycle boundaries.

Spiral-bevel trial

Approve the cutter settings and locating method, then inspect the machined member to its specified criteria. If the purchase includes a matched pair or assembly performance, agree the mating member, contact-pattern/backlash evaluation and test conditions separately. Cutting one member does not prove assembly acceptance.

For both routes, separate machining time from loading, setup, inspection and tool changes. Retain the program, tooling list and inspection report. Include control backups, training, utilities, foundation requirements and destination service obligations in the handover.

MLTOR's gear-manufacturing focus

MLTOR's official company material identifies 中山迈雷特数控技术有限公司 in Zhongshan, Guangdong. Its reviewed catalog covers gear-processing machines and related control/automation offerings. The two machines above address distinct gear forms; they do not represent interchangeable capacity or every product in the company's catalog.

A Zhongshan Science and Technology Bureau notice dated 21 August 2026 lists the company against a precision-gear flexible-manufacturing equipment pilot platform in a proposed recognition list. This is a dated proposed-list record, not evidence of final approval or machine-model certification.

The selection and acceptance guidance on this page is CNCVerified's editorial analysis of the reviewed manufacturer material. A quotation should identify the contracting entity, exact machine configuration, tooling and service responsibilities.

Send a gear-specific machining brief

Attach the gear drawing and blank section, tooth-system data, material and heat-treatment state, locating surfaces, batch mix and inspection criteria. Name the internal-skiving or spiral-bevel route and request a demonstrated cutter/fixture proposal.

Request an MLTOR quote ↗