Factory profile · CNC turning
Wuxi Shengong Precision CNC Machine Tool Co., Ltd.
Choose among three reviewed lathes by the cut diameter, usable length, grip and any cross-machining—not by bed swing alone.
Manufacturer model tables reviewed September 2026 · Profile reviewed October 2026
- Published range
- CNC lathes and dedicated turning equipment
- Reviewed here
- SG450 · SG500CXF · SG630
- First buyer check
- Shaft, disc or bar stock?
Which dimension eliminates a machine first?
Write down the largest stock diameter, finished diameter, longest uninterrupted cut and support method. A part may clear the bed but still miss the cutting envelope once the turret and chuck are in place.
| Machine | Shaft / disc cut | Length | Deciding question |
|---|---|---|---|
| SG450 | Ø200 / Ø300 mm | 370 mm turning | Will the compact grip and tailstock clear every shoulder? |
| SG500CXF | Ø280 / Ø400 mm | 450 mm turning | Does the job need a separately specified powered-tool package? |
| SG630 | Ø350 / Ø550 mm | 1000 mm workpiece | How will the longer/heavier part be supported and loaded? |
On a narrow screen, swipe the table sideways.
Three numbers that buyers often mix up
- Bed swing is clearance, not cutting diameter. Identify the maximum diameter at each operation, including shoulders and facing; compare with the maker's shaft or disc cutting limit.
- Spindle bore is not usable bar capacity. SG450 and SG500CXF list 52 mm bar capacity; SG630 lists 90 mm bar capacity and a 105 mm bore. A drawtube, collet and feeder still determine the real pass-through setup.
- Turning length needs a support plan. Include chuck projection, tailstock/steady-rest need, tool clearance and the cut's farthest datum—not just the blank's overall length.
For a disc: send the gripping diameter, jaw height, blank mass and facing surfaces. For a shaft: send unsupported projection, center holes, journals and whether a steady rest can contact the part.
What the three catalog entries actually establish

SG450: short-part route
The 30° slant-bed model lists an 8-inch chuck and 370 mm turning length. Ask for a grip-and-tool sketch on the largest blank; the maker's broad series claims do not replace this model's own configuration table.
SG450 model and specifications ↗
SG500CXF: cross-features need a named package
Its reviewed table supports the shaft, disc and length limits above. A turning-and-milling series name does not establish powered-tool speed, milling motor or Y-axis travel. List every cross-hole, flat and keyway, then request the actual turret and control specification.
SG500CXF model and specifications ↗
SG630: larger work, different handling
The catalog lists A2-8 spindle nose, 22 kW spindle and an eight-station servo turret. These do not by themselves confirm the workpiece weight or fixture method. Ask for the tailstock, lifting and installed toolpost layout for the actual part.
SG630 model and specifications ↗Use one trial part to test the proposed setup
Choose the part with the largest difficult shoulder, longest supported span or most demanding cross-feature. State material and blank condition, clamping method, program and tool list, tolerance, finish and measuring instrument. Request the resulting measured part and cycle breakdown, including loading, tool changes and rework—not a no-load spindle video.
If SG500CXF is proposed for off-axis work, the quote must list driven-tool station count, speed/power, C/Y-axis scope if offered, holder and control. The source table alone does not prove those functions.
What was checked
The Chinese-language manufacturer pages identify 无锡沈工精机数控机床有限公司 and publish the three named model tables. Their company account describes flat-bed, slant-bed and dedicated CNC turning equipment. Those are manufacturer statements, not an independent factory audit or achieved part-tolerance guarantee.
A 2025 Jiangsu technology-SME intake list includes the named Chinese company. It is a dated entity record; it does not certify a machine, workshop or current delivery terms. Exact manufacturer URLs and field-level source mapping are retained in the private editorial record.
Let the factory check the real turning setup
Include these items in the CNCVerified RFQ so the response can name a specific machine and configuration:
- Part drawing/STEP, material, blank and finished shaft/disc dimensions.
- Grip, tailstock/steady-rest and bar-feed requirements; annual volume.
- Cross-features, tolerances, finish, sample-trial and inspection method.
- Destination, expected installation support and the proposed model/options.