Conprofe · 3-axis machining
Conprofe UEM-400
Conprofe UEM-400 is a gantry engraving/milling reference for small features in hard/brittle materials, composites and difficult metals. Its exact table gives 400 / 400 / 150 mm X / Y / Z travel, a 400 × 400 mm table and 100 kg rated load. The short Z space makes blank, fixture, cutter and holder projection a combined clearance decision; specify the deepest feature and the actual entry/exit support.
The spindle table has separate interface columns. Its HSK-E25 column pairs 50000 rpm short-time with 40000 rpm continuous, 14 non-ultrasonic or 13 ultrasonic tool positions, 60 mm maximum full-magazine tool diameter and 90 mm maximum length. Tool mass is listed as 3 kg. Keep that column intact: the other interface columns have different duty, length and tool-capacity references.
The model description names Huazhong 918D with Siemens 828D-280 optional. Rotary-table, five-axis/RTCP, probe, tool-setting and ultrasonic amplitude-measurement arrangements require an identified configuration. The headline interface alternatives and some optional magazine references differ from the exact table; select a complete documented spindle, holder, generator and tool schedule instead of combining their largest values.
Catalog specifications
- Machine arrangement
- Gantry engraving/milling
- X / Y / Z travel
- 400 / 400 / 150 mm
- Table dimensions
- 400 × 400 mm
- Table load
- 100 kg
- Rapid traverse X / Y / Z
- 15 / 15 / 15 m/min
- Selected table-column interface
- HSK-E25 reference; other builds separate
For small holes or fragile edges, supply material grade/condition, minimum diameter and wall, breakthrough support and allowable edge/surface damage. Trial the selected ultrasonic, tool and cooling setup with representative geometry, inspect after cleaning and release, and include tool condition, setup, rejects and measurement in output. Catalogue positioning claims are machine references, not a guaranteed finished feature tolerance.