Hengda turning
Hengda HL18-T250
Zhejiang Hengda CNC Equipment Co., Ltd. · Shaoxing
- Maximum cutting diameter / length300 / 250 mm
- Bed swing400 mm
- Bar capacity / spindle bore36 / 45 mm
- Spindle noseA2-5
- Chuck reference6 inches
Hengda HL18-T250 is the turret configuration in the paired 18-series table, distinct from the HL18-J500 gang-tool column. It lists Ø300 mm maximum turning diameter and 250 mm maximum turning length, with Ø400 mm bed swing. For a short disc, first draw the jaws, part shoulder and every tool approach; swing is clearance, not a guaranteed cutting envelope.
The spindle reference is A2-5 with a 6-inch chuck, Ø45 mm through-hole and Ø36 mm maximum bar. Maximum speed is 4500 rpm; the table names a 5.5 kW permanent-magnet synchronous motor and 49 N·m maximum spindle-output torque. Obtain the complete duty and speed/torque curve rather than assuming the maximum torque is available at maximum rpm.
X/Z travel is 170 / 300 mm with 30 / 30 m/min rapid movement. The servo-hydraulic turret lists 8 / 12 position alternatives and 20 × 20 mm turning-tool shanks. Name the offered turret and occupied holder schedule. The J500 column’s 500 mm X travel and gang arrangement do not belong to this T250; family turning-milling language does not establish live tools, Y travel or continuous C interpolation.
Trial representative material and blank allowance with the intended gripping contact, tools and unsupported length. Include indexing/loading and inspect bore/OD/face relationships after unclamping; catalogue axis figures are not finished-part guarantees. Reference mass is 2300 kg. The current series enclosure is visibly J500, so it is not used as a T250 photograph; the factory page’s original turret illustration explains family structure only.