Skip to content

Hengda turning

Hengda HL205-T500

Zhejiang Hengda CNC Equipment Co., Ltd. · Shaoxing

  1. Maximum cutting diameter / length382 / 485 mm
  2. Bed swing560 mm
  3. Bar capacity / spindle bore45 / 56 mm
  4. Maximum spindle speed4500 rpm
  5. Spindle nose / chuckA2-5 / 6 inches

Hengda HL205-T500 is the first T column in the 20-series 500 table. It lists Ø382 mm maximum cutting diameter and 485 mm cutting length; the 500 suffix and 500 mm Z travel do not make usable cutting length 500 mm. Its Ø560 mm bed swing is a separate clearance reference for the workpiece, jaws and tool arrangement.

The A2-5 spindle has a 6-inch hydraulic-chuck reference, Ø56 mm bore and Ø45 mm bar capacity, with 4500 rpm maximum speed. The table’s 87 N·m item is labelled main-motor torque, not guaranteed spindle output across the speed range. Obtain the installed motor/spindle duty curve and actual chuck tube/liner/feed arrangement for production bar.

The T column lists 195 / 500 mm X/Z travel, 30 / 30 m/min rapid movement, eight turret stations, 25 × 25 mm turning shanks and Ø32 mm boring shanks. Its tailstock references are 85 mm travel and Morse 4; obtain the coordinated support-position/stroke and tool-interference drawing. The separate Y460 column has ±35 mm Y travel and different tool/diameter references, which are not transferred to T500.

Demonstrate the intended supported shaft or disc with full tool changes and inspect the released part. Include loading, chip handling and inspection in accepted-output time. Reference mass is 3400 kg and total capacity 16 kVA. The catalogue separates right-discharge 3290 × 1540 × 1710 mm from rear-discharge 2355 × 2355 × 1710 mm arrangements; coordinate the actual chip system and service access. The family enclosure photograph marked HL202-T500 is not presented as this model.

Additional specifications

X / Z travel
195 / 500 mm
Rapid X / Z
30 / 30 m/min
Turret positions
8
Turning / boring shank
25 × 25 mm / 32 mm diameter
Tailstock-travel reference
85 mm; confirm full support drawing
Tailstock taper
Morse 4
Total electrical capacity reference
16 kVA
Main motor torque reference
87 N·m; spindle output/duty separate
Machine mass
3400 kg

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.