Skip to content

Hengya turning

Hengya CK61100

Shandong Hengya Machine Tool Co., Ltd. · Linyi

  1. Reviewed bed widths600 / 650 mm; selected build required
  2. Bed / cross-slide swing1000 / 680 mm
  3. Maximum centre distance1500 mm
  4. Spindle bore / nose105 mm / C11
  5. Main motor15 kW

CK61100 is a Hengya CNC turning reference under 600/650 mm bed widths. The table gives 1000 mm bed swing, 680 mm cross-slide swing and 1500 mm maximum centre distance. Draw the actual jaws, fixture, blank and tool path. A 1000 mm bed swing does not establish turning a 1000 mm disc over the slide, and the table does not state permitted workpiece mass.

The spindle has a listed 105 mm bore, C11 nose and metric 120 taper at 1:20. A 15 kW motor drives three variable-speed ranges L 25–100, M 80–260 and H 240–700 rpm. Verify torque and allowable speed with the selected chuck, mass and diameter. The larger external swing is not a larger through-spindle pipe capacity than this table's 105 mm bore.

The HAK-21280 four-station vertical electric turret lists 32 × 32 mm tool shank and 4.1 s indexing; K11-400 is the three-jaw chuck reference. Tailstock quill is Ø100 mm, 250 mm travel and MT6. X/Z rapids are 4000/5000 mm/min. The 0.001 mm feed-setting unit describes motion command increment and must not be presented as machining accuracy. Occupy all required tools and check support and collision through the longest cut.

GSK980TC3 is listed as standard with catalogue alternatives requiring current build confirmation. The 3800 × 2200 × 2000 mm dimensions and 7/7.7 t net mass do not resolve which mass belongs to each bed width. Obtain that mapping, load/foundation and lifting drawings before site preparation. Trial the actual heavy or long part with final support, inspect after release and include loading, gear changes, chip removal, tool indexing and measurement in the accepted-part cycle.

Additional specifications

Variable-speed ranges
L 25–100; M 80–260; H 240–700 rpm
X / Z rapid
4000 / 5000 mm/min
Minimum feed-setting unit
0.001 mm; not accuracy
Turret
HAK-21280, vertical four stations
Chuck reference
K11-400, three jaws
Tailstock quill
Ø100 mm, 250 mm travel, MT6
Overall L × W × H
3800 × 2200 × 2000 mm
Published net mass
7 / 7.7 t; bed-to-mass mapping unresolved

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.