Hengya turning
Hengya QK1313
Shandong Hengya Machine Tool Co., Ltd. · Linyi
- Pipe threading rangeØ30–126 mm
- Spindle bore135 mm; not usable pipe capacity
- Bed / cross-slide swing630 / 330 mm
- Maximum centre distance1500 mm
- Bed width550 mm
QK1313 is Hengya's CNC pipe-threading reference with a published Ø30–126 mm threading range and 135 mm spindle bore. Those dimensions answer different questions. Provide pipe OD, wall, straightness, total length, end allowance and thread drawing; confirm the actual jaw opening and rear support before treating the bare bore as usable pipe capacity.
The current 550 mm-bed table lists bed/cross-slide swings of 630/330 mm, maximum centre distance 1500 mm and X/Z travel 350/1250 mm. Its 300 mm spindle-centre-height entry needs a current dimensional drawing to resolve its relationship with the 630 mm swing. Model a full pipe, chuck jaws, toolholder and supports through facing, threading and withdrawal rather than inferring clearance from one catalogue number.
The reference uses an 11 kW motor, two variable-speed ranges L 15–130 and H 130–800 rpm, and a HAK21240 four-station vertical turret with 32 × 32 mm tool shank and 2.6 s indexing. The K11-380 three-jaw chuck is a listed reference, not proof of automatic gripping or an approved force for a thin pipe. Agree allowable speed with the actual pipe/support and demonstrate synchronised threading, relief and burr control.
GSK980TC3 is listed as standard; FANUC 0i-TF, Siemens 808D, KND K1000Ti and GSK980TDC are catalogue alternatives requiring a selected-build offer. Trial the thin wall and longest supported pipe, then inspect the required thread/gauge, taper and run-out after release. Include loading, support setting, cutting, regripping and inspection in the accepted-part cycle. Obtain guarding, rear support, foundation/power and lifting drawings; the listed 3800 × 1900 × 1900 mm dimensions and 5.2 t net mass are not a complete installation package.