Hengya turning
Hengya CK6180
Shandong Hengya Machine Tool Co., Ltd. · Linyi
- Reviewed bed version550 mm bed width
- Bed / cross-slide swing800 / 530 mm
- Maximum centre distance1500 mm
- Spindle bore / nose105 mm / C11
- Main motor11 kW
This CK6180 record follows Hengya's current 550 mm-bed table. Its separately published 600/650 mm-bed reference must not be merged into this configuration. The reviewed bed/cross-slide swings are 800/530 mm with 1500 mm maximum centre distance. Check disc overhang, chuck jaws and toolholder clearance; for a shaft, show support, tailstock engagement and the longest occupied cutting position.
The spindle reference is a 105 mm bore, C11 nose and metric 120 taper at 1:20, with an 11 kW main motor. Three variable-speed ranges are L 10–200, M 180–500 and H 480–1200 rpm. Request usable torque, permissible workpiece/chuck mass and speed for the proposed part. A bed-swing limit or the top of a speed range does not establish safe production of an arbitrary heavy disc.
The HAK-21240 vertical electric turret has four stations, 32 × 32 mm shank and listed 4.1 s indexing. The chuck reference is K11-320. Tailstock quill is Ø100 mm with 250 mm travel, but the source says MT5/6 without selecting one; resolve the actual taper before purchasing centres. X/Z rapids are 4000/5000 mm/min. The 0.001 mm minimum feed-setting unit describes commanded increment, not positioning accuracy or finished size.
GSK980TC3 is the stated standard control; alternative FANUC, Siemens, KND and GSK packages require current configuration confirmation. Trial the actual fixture and difficult shaft/disc after warm-up, release the part and inspect size, roundness and datums. Include gear changes, chip clearing, support adjustment and inspection in cycle time. The listed dimensions are 3650 × 1880 × 1880 mm and net mass 5.5 t; obtain selected-build load, lifting, foundation, power and service-access drawings.