Skip to content

Juxin turning

Juxin JXLC40D

Juxin Machine Tool Co., Ltd. · Taizhou

Original Juxin twin-station vertical lathe image marked JXLC40D
Original manufacturer image marked JXLC40D. Independent-control callout is a manufacturer description; confirm delivered fixtures and handoff.
  1. Maximum turning diameter400 mm
  2. Maximum part height300 mm
  3. Swing diameter450 mm
  4. Inner-bore machining entryWithin 300 mm
  5. Published spindle-speed entry3000 rpm

JXLC40D is Juxin’s disc-oriented twin-station vertical lathe reference with 400 mm turning diameter, 300 mm part height and 450 mm swing. The source separately limits the inner-bore machining entry to within 300 mm. Check the actual jaw and tool envelope for the intended disc or housing.

The table lists 3000 rpm, an A2-6 spindle interface and 8/10-inch hydraulic chuck choices. The source heading calls A2-6 a bore value, but it is an interface designation, not a through-bore diameter. Select the motor, chuck, turret and controller in the quotation.

Two independent turning stations require an OP10/OP20 fixture and handling plan. Define the datum created in the first setup and protected during turnover, then measure concentricity, face runout and thickness after the second operation and release. The 10 m/min rapid entry and 1.5-second turret change do not establish a complete production cycle.

Additional specifications

Hydraulic chuck choices
8 / 10 inch; select configuration
Spindle interface
A2-6; not bore diameter
X / Z travel
250 / 610 mm; confirm disc center-crossing limit
Rapid movement X/Z
10 m/min
Spindle motor choices
7.5 / 11 kW; confirm version and duty

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.