Skip to content

Juxin turning

Juxin JXLC63D

Juxin Machine Tool Co., Ltd. · Taizhou

Original Juxin twin-station vertical lathe image marked JXLC63D
Original manufacturer image marked JXLC63D. Independent-control callout is a manufacturer description; confirm delivered fixtures and handoff.
  1. Maximum turning diameter530 mm
  2. Maximum part height400 mm
  3. Swing diameter630 mm
  4. Inner-bore machining entryWithin 300 mm
  5. Published spindle-speed entry1000 rpm

JXLC63D is the larger disc-oriented reference in Juxin’s twin-station vertical turning catalogue. Its model table gives 530 mm turning diameter, 400 mm part height and 630 mm swing, while the inner-bore machining entry remains within 300 mm. Larger swing does not increase every machining limit.

The reviewed standard page lists 1000 rpm and 15/18-inch hydraulic chuck alternatives. A2-8/A2-11 describe spindle-interface choices; the table’s bore heading must not convert them to millimeter bore values. Specify the motor version, jaws, turret, tool clearance and actual loading arrangement.

Plan a first operation, turnover and second locating setup for the real disc or housing. Confirm the datum transfer and inspect the released part after both operations. Compare measured complete-cycle output, fixture access and robot recovery separately from catalogue rapid movement or advertised percentage improvements.

Additional specifications

Hydraulic chuck choices
15 / 18 inch; select configuration
Spindle interface choices
A2-8 / A2-11; not bore dimensions
X / Z travel
250 / 610 mm; confirm disc center-crossing limit
Rapid movement X/Z
10 m/min
Spindle motor choices
18.5 / 22 kW; confirm version and duty

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.