Skip to content

Kaida · 3-axis machining

Kaida KDVM1270L

Kaida KDVM1270L manufacturer image
The shared source page illustrates KDVM1160L; this is not a KDVM1270L delivery photograph.

KAIDA's combined KDVM1160L/1270L page gives separate columns for the two machines. KDVM1270L adds table area, load and travel for a larger milling fixture: 1360 × 700 mm table, 1000 kg loading reference and X/Y/Z travel 1200/700/700 mm. Include the fixture, vises and every loaded blank, and map cutting features from the programmed datum before choosing the larger build.

The nose-to-table window is 190–890 mm and the spindle-centre-to-column-guide distance 770 mm. The minimum nose position is higher than 1160L's 120 mm, so a short tool over a shallow fixture needs its own reach check; more Z travel does not preserve the same near-table geometry. Five 18 mm T-slots are spaced 120 mm apart. Check holder, clamps and retract positions against the proposed build drawing.

The source keeps 8000 rpm, BT40/Ø150, an 11/15 kW motor pair and a 24-tool magazine for this column. Motor duty and torque curves require confirmation. Tool limits are Ø78 mm with adjacent positions occupied or Ø120 mm with neighbouring positions free, 300 mm length and 8 kg mass. Select the real holder map and control options rather than assuming greater table capacity changes spindle or tool limits.

Catalog specifications

X / Y / Z travel
1200 / 700 / 700 mm
Table dimensions / load
1360 × 700 mm / 1000 kg
Spindle nose to table
190–890 mm
Spindle centre to column guide
770 mm
T-slot layout
5 × 18 mm wide, 120 mm spacing
Outer dimensions
3360 × 3450 × 2950 mm; chip conveyor excluded

1270L outer dimensions are 3360 × 3450 × 2950 mm excluding the chip conveyor, with an 8.8 tonne mass reference. Plan the additional conveyor and maintenance access, foundation, lifting and utilities. The common source image is marked 1160L, so it is retained only as an explicitly labelled family illustration, not a 1270L delivery photograph. Obtain the selected machine's drawing and actual-build image, and agree a material/fixture trial with full-cycle and released-part inspection.

Other Kaida rows

Additional specifications

Machine mass
8.8 tonnes
Spindle reference
BT40/Ø150; spindle drawing required
Spindle speed
8000 rpm
Spindle motor notation
11/15 kW; duty/torque curves to confirm
Rapid X / Y / Z
36 / 36 / 30 m/min
Magazine
24 tools
Tool diameter
Ø78 mm with adjacent positions occupied / Ø120 mm with adjacent positions clear
Maximum tool length / mass
300 mm / 8 kg
Tool-to-tool reference
2 seconds; not full cycle time
Published control
FANUC 0i MF (5); delivered version/options to confirm

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.