Skip to content

Yangsen MHE-1810

Gantry · Xiamen Yangsen CNC Equipment Co., Ltd.

Catalog figures — see source review
X / Y / Z travel1800 / 1000 / 800 mm
Spindle nose above table100–900 mm
Table dimensions1660 × 1000 mm
Gate width1800 mm
Guide / ram arrangementX/Y linear guides; Z square ram 350 × 350 mm
Yangsen MHE-1810 manufacturer image

Whole original current manufacturer image visibly marked MHE-1810; enclosure and auxiliaries require selected-build confirmation.

MHE-1810 is Yangsen's compact fixed-beam gantry reference, distinct from NHE-4029. The current manufacturer card lists X/Y/Z 1800/1000/800 mm, a 1660 × 1000 mm table and 1800 mm gate width. Match a supported component or mould to those independent dimensions rather than scaling another gantry's capacities into this one.

The spindle-nose-to-table range is 100–900 mm. A part may fit on the table while its fixture and longest tool leave insufficient approach or cutting room. Draw the holder, clamp heights, deep bore and furthest edge through the whole cut. Gate passage includes the occupied clamp/tool assembly; it is not a finished-part width guarantee.

The current card describes X/Y linear guides and a 350 × 350 mm square Z ram. Agree the actual permissible load and distribution, spindle taper/torque duty, magazine, tool limits and any side attachment on the dated build sheet. If the operation needs a head, define its offsets, clamping, handling and reach; a picture of the enclosure does not establish simultaneous multi-axis functions or head-change automation.

Trial the tallest fixture and longest tool using the intended blank and support. Inspect size, form and datums after release, and include setting, roughing/finishing, tool changes, chip removal and inspection in usable cycle time. Request the actual foundation/lifting, utility, access, backups and destination service package. The current live catalogue dimensions are published here; the detail-page compile error leaves unconfirmed full-sheet values out. The original matched MHE-1810 image is shown whole, with supplied auxiliaries to be confirmed.

Same listing
NHE-4029
RVZ-500D