ZDCY YKA2235
Gear cutting · Hunan ZDCY CNC Equipment Co., Ltd.
| Operation | Bevel-gear tooth cutting; dry/wet routes |
|---|---|
| Controlled / simultaneous axes | 6 / 6 |
| Maximum gear diameter | 350 mm |
| Maximum face module | 10 mm; not normal module |
| Teeth / maximum gear ratio | 1–200 / 200:1 |
| Face-milling cutter diameter | Ø3.25–9 inches |
Whole matching original YKA2235 manufacturer catalogue photo; delivered auxiliaries/configuration to confirm.
YKA2235 is a bevel-gear tooth-cutting machine, not a grinding operation. ZDCY describes six controlled axes with six-axis simultaneous motion and dry/wet cutting, including inline chamfering. Its listed routes include cycloidal constant-depth, circular-arc tapered-depth, face-gear, HRH and straight-bevel work. Start with both mating gears, tooth-system definition, handedness and mounting geometry, then agree the exact process and adjustment data with the selected cutter/fixture package.
The individual table specifies 350 mm maximum diameter, maximum face module 10 mm, 1–200 teeth and maximum ratio 200:1. It separately lists face-milling cutter diameter 3.25–9 inches and face-hobbing cutter radius 39–105 mm. Diameter and radius conventions are different; do not substitute normal module for face module. Confirm tooth depth, face width, blank/fixture interface and cutter clearance against the complete gear definition rather than treating 350 mm as general swing capacity.
The source describes HCS machining-control software integrated with Siemens ONE, stock distribution, fixture/temperature compensation, inline measurement and an optional automatic door. It also lists dust collection for the process route. Agree the installed functions, dry/wet auxiliaries, cutter-setting equipment, automation and software licences individually. CHIMES design/contact-analysis modules are separate from a machine-control package. An automatic door alone does not establish an automatic production line or accepted production cycle.
For a pre-heat-treatment cutting route, agree material, blank datums, tooth allowance and the subsequent distortion/finishing plan. Trial a representative pair, record the accepted tooth measurement and required contact conditions, and trace any adjustment revision. The catalogue DIN/roughness references do not guarantee every drawing. The table lists 20,500 kg net mass, 65 kW total machine power, 3060 × 3240 × 3360 mm machine dimensions and 5400 × 5200 mm occupied-area reference; confirm auxiliaries, maintenance access and foundation separately. The photograph is the whole original YKA2235 catalogue image.
| Same listing |
|---|
| YK2035G |
| YKA2060 |