Skip to content

BYJC · 3-axis machining

BYJC MXR-460V-e

BYJC MXR-460V-eX 762 · Y 460 · Z 450 mm · BT40
Schematic based on catalog figures; not a product photograph. See source-review notes below.

MXR-460V-e belongs to the BYJC–OKUMA MXR-V-e series described for milling, drilling, boring and tapping small/medium box parts and valve bodies. Its exact column gives 762/460/450 mm X/Y/Z travel, printed table dimensions 460 × 1000 mm and 500 kg maximum load. Use feature coordinates and the full part/fixture mass rather than treating the table’s long dimension as X travel. Obtain the table drawing and clamping arrangement.

The spindle uses BT40 and runs from 50 to 8000 rpm. The manufacturer explicitly separates 11 kW for ten minutes from 7.5 kW continuous duty. Select holders, boring tools and the sustained cut against the actual torque/speed and duty curve. A brief power rating is not continuous roughing capacity, and more spindle rpm is not a guarantee of shorter drilling or tapping cycles.

The shared series table gives 20 tool positions. Tool diameter, mass, length and occupied-neighbour limits need the selected build sheet. The optional CNC rotary arrangement is four axes with three simultaneous movements; clarify indexing versus coordinated motion and the rotary/control integration. Include centre height, complete fixture sweep and added mass in the setup review, rather than assuming a five-axis blade machine.

Catalog specifications

X / Y / Z travel
762 / 460 / 450 mm
Printed table dimensions
460 × 1000 mm; orientation to confirm from drawing
Maximum table load
500 kg
Spindle range
50–8000 rpm
Tool interface
BT40
Spindle power (10-minute / continuous)
11 / 7.5 kW

Although Z travel is 450 mm, the reviewed table does not state the minimum/maximum spindle-nose distance. Confirm holder access to the deepest bore, withdrawal above clamps and chip clearing with the actual valve or housing. Trial locating repeatability, bore position and any leak-critical or mating face under agreed inspection conditions. The published series photograph is visibly MXR-560V-e, so it is not assigned to this 460V-e record.

Other BYJC rows

Additional specifications

Tool positions
20
Optional rotary package
Four axes, three simultaneous movements; selected package to agree

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.