BYJC XKAμ
Gantry · Beijing No.1 Machine Tool Co., Ltd. (BYJC)
| Manufacturer designation reference | Page XKAμ; description XHAμ; table Aμ — exact build to confirm |
|---|---|
| X / Y / Z travel | 5000 / 2500 / 1500 mm |
| Table width | 2000 mm |
| Rapid X / Y / Z | 20 / 20 / 15 m/min |
| Mechanical spindle-head maximum speed | 4000 rpm |
| Spindle-head power (S1) | 37 kW |
The manufacturer’s page is headed XKAμ, its description says XHAμ and its table says Aμ. Those are retained as a designation question for the exact quoted build, rather than silently treating them as an identical model revision. The reviewed table gives 5000/2500/1500 mm X/Y/Z travel and 2000 mm table width. Table length, load and installed footprint require a model-specific drawing.
The described gantry uses hydrostatic guides, a wrapped hydrostatic ram and a C-axis indexing/locating unit that clamps different attachment milling heads. The source describes five-face machining through that arrangement. It does not establish simultaneous five-axis contouring. List the required faces and side bores, then identify each head, indexing position, approach and datum transfer.
The table’s mechanical spindle head reaches 4000 rpm and lists 37 kW and 1000 Nm at S1 duty. Obtain its actual speed/torque curve; maximum torque and rpm are not a simultaneous operating-point guarantee. X/Y rapids convert from 20000 mm/min to 20 m/min, and Z from 15000 to 15 m/min. Another attachment head needs its own cutting ratings and usable envelope.
Provide the largest housing, clamping layout, farthest side bore and complete holders. Review ram extension, crossrail clearance, head seating/indexing, tool-centre calibration and probing. Trial and measure face-to-face relationships after all required orientations under agreed thermal conditions, including head-change time. The page’s published pictures show TAURUS machines, so they are deliberately not represented as exact XKAμ photographs.
| Same listing |
|---|
| MXR-460V-e |
| MXR-560V-e |
| XKH400A |
| XKH800C |