Skip to content

5-axis · BYJC

BYJC XKH800C

Beijing No.1 Machine Tool Co., Ltd. (BYJC)

Whole original XKH800C photo with visible model label.

XKH800C is the larger reviewed BYJC–Ferrari blade centre, with 1350/400/500 mm X/Y/Z travel and 750 mm published U-axis travel. Neither the 1350 mm X figure nor the U figure establishes the finished blade length. Request the axis diagram, adjustable support range, complete root/tip fixture and rotary/holder sweep for the proposed blade or narrow profile.

The source lists HSK-A63, 30 kW spindle power and 94.9 Nm torque, with no duty definition or spindle-speed range in the reviewed table. The higher torque entry is not a guarantee of every material’s removal rate. Obtain the selected spindle curve, cooling, tool/holder limits and a proved process. The rapid row prints 20 under mm/min without sufficient explanation; it is excluded from the performance comparison until confirmed.

The manufacturer describes simultaneous five-axis machining of turbine/gas-turbine/aircraft-engine blades and narrow shaped parts across several metal classes. That is an application description, not a certificate or an approved customer programme. Define thin-section support, datum location, clamp force and any roughing-to-finishing fixture transfer. Verify CAM/postprocessor and collision behaviour at root fillets, edges and extreme tool orientations.

The listed body is 3650 × 2880 × 2900 mm and net mass 14000 kg. Obtain installation and service clearances with support equipment. Accept the released-part profile/thickness under agreed thermal and measurement conditions, and repeat loading, cutting, tool checks and inspection for the production sequence. The retained whole original photo visibly bears XKH800C; its appearance is not measured blade accuracy.

Catalog specifications

X / Y / Z travel
1350 / 400 / 500 mm
Published U-axis travel
750 mm; function and support spacing to confirm
Spindle interface
HSK-A63
Published spindle power
30 kW; duty unspecified
Published spindle torque
94.9 Nm; duty unspecified
Body L / W / H
3650 / 2880 / 2900 mm

Related catalog records

Additional specifications

Net mass
14000 kg
Machining description
Simultaneous five-axis blade and narrow-profile machining

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.