Hangji · 3-axis machining
Hangji XHK1890
Hangji XHK1890 is the larger BT50 hard-guide reference for a broad/heavier setup. The table is 2000 × 900 mm with 1600 kg rated load, and X / Y travel is 1800 / 900 mm. Define the blank’s support and overhang, clamp locations, loading route and fixture mass before choosing it for table size alone.
The source prints Z as 680 (800) mm, while the spindle-nose-to-table range is 160–840 mm. Ask which Z version is quoted and obtain a coordinated fixture/tool and machine drawing. Do not extend the nose-to-table range by the optional travel difference without build evidence; long cutters and high fixtures need an actual approach and retract check.
The column lists 6000 rpm BT50, three hard-guide axes, a 15 / 18 kW drive-power pair without defined duties, and a 24-position disc magazine. The BT50–Φ190 notation is not evidence of a through-spindle bore. Specify the spindle output curve, cutter engagement, holder and occupied-magazine limits, with lubrication and control/postprocessor details for the ordered machine.
Catalog specifications
- X / Y travel
- 1800 / 900 mm
- Z travel alternatives
- 680 mm (800 mm alternative); confirm delivered build
- Table size
- 2000 × 900 mm
- Rated table load
- 1600 kg
- Spindle nose to table reference
- 160–840 mm; coordinate alternative Z build
- Spindle speed / interface
- 6000 rpm / BT50
At the planned roughing duty, run representative material and cutter projection, observe the supported setup and inspect critical geometry after unclamping. Repeat against the agreed drawing and count accepted pieces across setup, cutting, chip removal and inspection. Reference net/gross mass is 15 / 17 tonnes; foundation, crane/handling and destination supply need the delivered engineering schedule. The source tables establish this model’s parameters, while an exact approved photograph remains outstanding.