Hangji · 3-axis machining
Hangji XK714
Hangji XK714 / XHK714 is the middle configuration in the manufacturer’s small vertical-machine table. Its travel is 660 / 460 / 620 mm, table 950 × 460 mm and rated table load 400 kg. The wider table and longer Z travel do not raise its load above XK713’s 500 kg: assess fixture, clamps, blank and any attachment as one loading arrangement.
The nose-to-table range is 150–770 mm and the X/Y/Z guide reference is 35 / 35 / hard guide. Check whether a short tool can reach a low fixture and whether a long holder can clear the highest setup and retract path. Review lubrication and the actual loaded cutting behaviour rather than treating the guide label as a guaranteed finished-part result.
The catalogue lists 8000 rpm BT40, a 5.5 / 7.5 kW drive-power pair without defined duty, and a 20-position disc magazine. Request the delivered motor/spindle curve, control/postprocessor and occupied tool map. The separate XK714A column has 800 / 460 / 550 mm travel and other load/power references; its photograph and specifications must not be substituted for XK714.
Catalog specifications
- X / Y / Z travel
- 660 / 460 / 620 mm
- Table size
- 950 × 460 mm
- Rated table load
- 400 kg
- Spindle nose to table
- 150–770 mm
- Spindle speed / interface
- 8000 rpm / BT40
- Drive-power pair, duty not stated
- 5.5 / 7.5 kW
Prove the representative fixture and critical cut on production material, inspect after release and agree a repeated measurement method and accepted-output cycle. Net/gross mass references are 3.5 / 4.2 tonnes, with 2450 / 2660 / 2730 mm listed exterior dimensions. Obtain the current handling, foundation and service drawing before installation. An exact XK714 photograph remains a source-evidence gap; the profile does not label the A photograph as this model.