Skip to content

Hangji XK713

3-axis machining · Hangzhou Hangji CNC Machine Tool Co., Ltd.

Catalog figures — see source review
X / Y / Z travel600 / 400 / 500 mm
Table size1000 × 400 mm
Rated table load500 kg
Spindle nose to table110–610 mm
Spindle speed / interface8000 rpm / BT40
Drive-power pair, duty not stated5.5 / 7.5 kW

Hangji XK713 / XHK713 is the compact vertical reference in the paired catalogue column. X / Y / Z travel is 600 / 400 / 500 mm, with a 1000 × 400 mm table and 500 kg rated load. Its long, relatively narrow table makes clamp positions and cutter access more informative than the table area alone; include fixture and blank mass in the loading decision.

The listed spindle-nose-to-table window is 110–610 mm. Check the deepest cut and safe retract with fixture height, workpiece height and cutter/holder projection together. A rotary fixture needs its own mass, centre height and tool-approach clearance assessment; it is not established by the catalogue’s three linear travel numbers.

The column lists BT40, 8000 rpm, a 5.5 / 7.5 kW drive-power pair and a 20-position disc magazine. The power duties are not identified in this table. Obtain the installed spindle curve and full occupied tool schedule, including diameter, length, mass and adjacent empty positions. Do not infer those tool limits from another series column.

Trial the feature most sensitive to clamp distortion or tool reach using the production program and material. Measure against the drawing after release and record accepted output over setup, machining and inspection. Reference net/gross mass is 3 / 3.8 tonnes. The original sheet photographs XHK713 next to XHK714A; the neighbouring A configuration is separate, and the current manual must identify the ordered XK/XHK version.

Same listing
XHK1890
XK714
XK716B

Additional specifications

Disc magazine
20 positions
Feed / rapid reference
8 / 12 m/min
Net / gross mass
3 / 3.8 t

Figures come from the manufacturer's model material. Confirm the selected options in your RFQ.