Jirfine LM-1614

LM-1614 is a gantry machining centre whose source positions it for aluminium structures. Its table is 1700 × 1200 mm with 4 tonnes maximum load, while the gap between columns is 1400 mm. Include the fixture, clamps and part in the load and check their loading/holder passage through the opening rather than using table width as column clearance.

Published machining travel is X1600, Y1400 and Z600 mm. The additional 200 mm beside the Y entry is expressly for tool change, not additional cutting width. Nose-to-table distance is 120–720 mm. Review loaded height, farthest tool reach and exchange clearance separately before accepting a wide fixture.

The spindle is BBT40 at 12000 rpm, with torque 52.5/118 N·m and power 11/18.5 kW pairs lacking duty labels. The technical table gives XYZ rapids 30/30/24 m/min, but feature text lists 30/40/24. Settle the Y rapid and selected drive curve in the build sheet. These figures do not establish the rate or accuracy of every aluminium structure.

The listed body is 5000 × 4400 × 3600 mm. Obtain the foundation, crane/loading, door, holder and tool-change drawings and the exact control/magazine package. Trial the real clamping plan and farthest critical feature, including released geometry, chip management and agreed inspection conditions. General industry illustrations are not a promise of a completed automated process or a qualified buyer part.