Skip to content
Taizhou Dongbu CNC Equipment Co., Ltd. logo

Factory profile · CNC turning

Taizhou Dongbu CNC Equipment Co., Ltd.

Dongbu's four reviewed lathes solve different holding problems. Start with how the part is gripped and loaded, then shortlist by cutting diameter and length.

Manufacturer model tables reviewed September 2026 · Profile reviewed October 2026

Reviewed routes
Flat bed · slant bed · vertical
Named models
CK6136 · C400K · VTC80 · CK800
First buyer check
Grip and loading direction
01 / ORIENTATION FIRST

Where does gravity help the setup?

A long shaft usually needs horizontal support. A wide, short disc may be easier to locate on a vertical chuck, but lifting and fixture mass become critical. Repeated chuck work may favor a slant bed when the quoted turret and chip flow suit the cycle.

Horizontal route

Compare CK6136 for smaller work, C400K for a slant-bed production setup, and CK800 for a larger flat-bed part. Mark the unsupported length and whether a tailstock or steady rest can contact the shaft.

Vertical route

Screen VTC80 for a wide workpiece held upright. Send the drawing with its center of gravity, lifting points and fixture weight. Its published cutting diameter does not establish allowable total workpiece mass.

02 / SHORTLIST TABLE

Four published envelopes, four different risks

Manufacturer-published limits for the named base models; final build needs confirmation.
Model and orientationMaximum cutPublished length / heightCheck before choosing
CK6136 · flatØ300 mm750 mm lengthTailstock/tool clearance; 8-inch manual chuck
C400K · slantØ320 mm base450 mm lengthBase versus optional driven-turret build
VTC80 · verticalØ800 mm650 mm machining heightFixture load, center of gravity and lifting
CK800 · flatØ700 mm1000 mm length20-inch chuck and heavy-part support

On a narrow screen, swipe the comparison sideways.

The CK800L is a separate variant. Do not transfer CK800 dimensions to it. Likewise, spindle bore and usable bar-feed diameter are different checks.

03 / MACHINE-SPECIFIC NOTES

Follow the part, not a generic size label

Manufacturer image of Dongbu CK6136 flat-bed CNC lathe

CK6136 · compact horizontal

The catalog lists 60–3500 rpm and a 61 mm spindle bore. Neither number proves the actual bar-feed passage; request the chuck, drawtube and feeder plan for bar stock.

CK6136 specifications ↗
Manufacturer image of Dongbu C400K slant-bed turning center

C400K · production grip

The reviewed base lists an 8-inch hydraulic through-hole chuck and 50 mm bar capacity. An 8/12-station turret or BMT45 driven package must be identified in the offered configuration; driven tooling is not assumed standard.

C400K specifications ↗
Manufacturer image of Dongbu VTC80 vertical lathe

VTC80 · wide disc upright

Its 21-inch hydraulic non-through-hole chuck and 50–1200 rpm range support a different loading plan. The reviewed record does not state a maximum workpiece weight; obtain written confirmation for part plus fixture.

VTC80 specifications ↗
Manufacturer image of Dongbu CK800 heavy flat-bed CNC lathe

CK800 · larger horizontal setup

The listed 20-inch manual chuck and 121 mm spindle bore still require a real gripping and support sketch. Verify toolpost, tailstock, part mass and lifting before accepting a diameter-only fit.

CK800 specifications ↗
04 / PART TRIAL

Test the hardest datum and the complete load cycle

Ask for a trial with the production stock, fixture and longest operation. For horizontal machines, record chuck projection, support position and far-end runout. For VTC80, include crane or loader access, center of gravity and post-clamp measurement. Time loading, tool changes, cutting and inspection separately; request measured parts against the drawing's tolerance and finish.

Separate base and optional equipment.

A model name does not guarantee a driven turret, a particular controller or automated loading. Request a single signed configuration sheet for the proposed build.

SOURCE & LIMITS

How far the evidence goes

Dimensions and equipment distinctions above are tied to Dongbu's named model product records reviewed in September 2026. A dated Wenling municipal technical-upgrade notice names the company, but a planned capacity in a notice is not observed output or a machine certification. Current configuration, delivery and service need a fresh written offer. Exact source URLs and field mapping remain in the private editorial record.

SEND A USEFUL REQUEST

Get a grip and support proposal

Use the CNCVerified RFQ to send:

  • Drawing/STEP, material, stock dimensions, finished faces and tolerance.
  • Grip diameter, blank mass, lifting points and support requirements.
  • Bar-feed, turret, driven-tool, control and loading options required.
  • Trial part, inspection plan, annual volume and installation destination.
Prepare a Dongbu RFQ ↗