Neway VM1370S
3-axis machining · Neway CNC Equipment (Suzhou) Co., Ltd.
| Table size (mm) | 1400 × 700 |
|---|---|
| Maximum table load (kg) | 1100 |
| X / Y / Z travel (mm) | 1300 / 700 / 700 |
| Spindle nose to table (mm) | 120–820 |
| Spindle centre to column guideway (mm) | 773 |
| X / Y / Z rapid (m/min) | 24 / 24 / 20 (S) |
VM1370S is listed with a 1,400 × 700 mm table, 1,100 kg maximum load and 1,300 / 700 / 700 mm travel. It increases X/Z reach and load over VM1270S, while retaining 700 mm Y travel. Check that the fixture needs those changes and that its mounting/clamps remain inside the working envelope.
For this S variant, the shared rapid cell gives 24/24/20 m/min; 30/30/24 belongs to H. The 8,000 rpm belt spindle lists No.40 and a bracketed No.50 choice, with BT40/tool-magazine entries that must be matched to the quoted build. Nose clearance is 120–820 mm and column distance 773 mm.
The currently attached source image is marked VM1270S and is not used to portray VM1370S. Request an accurate machine drawing/image, complete spindle/motor/cooling package and a representative loaded-fixture trial. Validate the difficult tool approach and released-part datums rather than borrowing H rapid values or a neighbouring model photograph.
| Same listing |
|---|
| VM1050S |
| VM1155S |
| VM1160S |
| VM1260S |
| VM1270S |
| VM1580S |
| VM1780S |
| VM1880S |